We are a team of vehicle electrical specialists helping with everything from lost car key replacements to re mapping and repairing electrcial faults on any vehicle no matter how big or small they may be.
Auto Locksmiths Dundee
Auto Locksmiths Dundee
We have a team of auto locksmiths covering the Dundee area and within 20 miles of Dundee 24 hours a dasy 365 days a year for when you have lost your car keys, you needs a spare car key making, your car key has become faulty, or if your vehicle is locked and needs to be unlocked by a professional auto locksmith in the Dundee area.
A transponder chip disarms a vehicle immobiliser when the car key is used to start the engine. The majority of keys to cars built after 1995 contain transponder chips.
When the car key is turned in the ignition, the engine control unit (ECU) on the car sends an electronic message to the key, and it will allow the car to start only provided it receives the correct message back. So, even for a simple car key without any buttons, the key must be cut correctly to turn the locks, and also programmed correctly to disarm the immobiliser. Car keys with chips can be programmed using special programmers.
Transponders programmed in Dundee
A transponder is short for: transmitter + responder.
The word came into use around 1945. In basic terms a transponder is a miniaturised electronic chip that has non-volatile memory, the type of memory that does not need constant energy for retention. Along with that electronic chip is a set of windings; very fine wire coiled around a tube. These windings look similar to the windings one would find in an electric motor.
There are two basic types of transponders. The first are the electric coupled transponder systems. Electric coupled transponder systems are not limited to small areas for transmission but can transmit messages or signals for different ranges of distance including several inches to miles, as used in satellites and airplanes. These systems require large amounts of constant electricity to operate. The second type is what automobile manufacturers are using and they are called magnetic coupled transponder systems. Magnetic coupled transponder systems are passive in nature. This means they do not require constant electricity and thus do not need a power source of their own. They operate in the frequency range area of 125 kHz. Since magnetic coupled transponders do not have their own power source they are very limited in range of communication and generally operate in the range of 1 cm to 15 cm. Since this is a radio frequency it can penetrate materials that would make the transponder not directly visible, such as the plastic or rubber in the bow of a key.
The process of key identification is similar in most automotive transponder systems. Once a key is inserted into the ignition lock and turned to one of the 'on' or 'run' positions, the induction coil that is mounted around the ignition lock sends out an electromagnetic field of energy. The windings in the transponder chip absorb that energy and power the electronic chip to emit a signal. The signal is usually an alphanumeric sequence which is considered the identification code. The induction coil reads the signal and sends it to some type of computer device to recognise the signal. If the signal is recognised as being already in the computer’s memory the signal is accepted and other electronic components in the vehicle are set into motion to allow the starting of the vehicle or the continuation of the engine running.
Immobiliser systems based on Transponders may not be as safe as they are considered to be. Some immobiliser systems tend to remember last key code for so long that they may even accept a non-transponder key even after a few minutes of taking out the original key from ignition.
Keyless Entry Systems Dundee
A keyless entry system is an electronic lock that controls access to a building or vehicle without using a traditional mechanical key. The term keyless entry system originally meant a lock controlled by a keypad located at or near the driver's door, that required pressing a predetermined (or self-programmed) numeric code for entry. These systems, having evolved into a hidden touch-activated keypad, are still available on certain Ford or Lincoln models.
The term remote keyless system (RKS), also called keyless entry or remote central locking, refers to a lock that uses an electronic remote control as a key which is activated by a handheld device or automatically by proximity.
Widely used in automobiles, an RKS performs the functions of a standard car key without physical contact. When within a few yards of the car, pressing a button on the remote can lock or unlock the doors, and may perform other functions. A remote keyless system can include both a remote keyless entry system (RKE), which unlocks the doors, and a remote keyless ignition system (RKI), which starts the engine.
One of the first introductions was in 1980 on the Ford Thunderbird, Mercury Cougar, Lincoln Continental Mark VI, and Lincoln Town Car, which Ford called Keyless Entry System (later renamed SecuriCode). It was a keypad on the driver-side exterior door above the door handle. It consisted of a keypad with five buttons that when the code was entered, would unlock the driver's door, with subsequent code entries to unlock all doors, and the trunk. Nissan offered the same technology on the Nissan Maxima and Nissan Fair-lady beginning in 1984, essentially using the same approach as Ford, with the addition of being able to roll the windows down and open the optional moonroof from outside the vehicle on the door handle installed keypad on both the driver's and front passengers door.
The remote keyless systems using a handheld transmitter first began appearing on the French made Renault Fuego in 1982, and as an option on several American Motors vehicles in 1983, including the Renault Alliance. The feature gained its first widespread availability in the U.S. on several General Motors vehicles in 1989.
Keyless remotes contain a short-range radio transmitter, and must be within a certain range, usually 5–20 meters, of the car to work. When a button is pushed, it sends a coded signal by radio waves to a receiver unit in the car, which locks or unlocks the door. Most RKEs operate at a frequency of 315 MHz for North America-made cars and at 433.92 MHz for European, Japanese and Asian cars. Modern systems implement encryption to prevent car thieves from intercepting and spoofing the signal. Earlier systems used infrared instead of radio signals to unlock the vehicle, such as systems found on Mercedes-Benz, BMW and other manufacturers.
The system signals that it has either locked or unlocked the car usually through some fairly discreet combination of flashing vehicle lamps, a distinctive sound other than the horn, or some usage of the horn itself. A typical setup on cars is to have the horn or other sound chirp twice to signify that the car has been unlocked, and chirp once to indicate the car has been locked. For example, Toyota, Scion, and Lexus use a chirp system to signify the car being locked/unlocked. While two beeps means that driver's door is unlocked, four beeps means all doors are unlocked. One long beep is for the trunk or power tailgate. One short beep signifies that the car is locked and alarm is set.
The functions of a remote keyless entry system are contained on a key fob or built into the ignition key handle itself. Buttons are dedicated to locking or unlocking the doors and opening the trunk or tailgate. On some minivans, the power sliding doors can be opened/closed remotely. Some cars will also close any open windows and roof when remotely locking the car. Some remote keyless fobs also feature a red panic button which activates the car alarm as a standard feature. Further adding to the convenience, some cars' engines with remote keyless ignition systems can be started by the push of a button on the key fob, and convertible tops can be raised and lowered from outside the vehicle while it's parked.
On cars where the trunk release is electronically operated, it can be triggered to open by a button on the remote. Conventionally, the trunk springs open with the help of hydraulic struts or torsion springs, and thereafter must be lowered manually. Premium models, such as SUVs and estates with tailgates, may have a motorised assist that can both open and close the tailgate for easy access and remote operation.
For offices, or residences, the system can also be coupled with the security system, garage door opener or remotely activated lighting devices.
Programming car keys Dundee
Remote keyless entry fobs emit a radio frequency with a designated, distinct digital identity code. Inasmuch as "programming" fobs is a proprietary technical process, it is typically performed by the automobile manufacturer. In general, the procedure is to put the car computer in 'programming mode'. This usually entails engaging the power in the car several times while holding a button or lever. It may also include opening doors, or removing fuses. The procedure varies amongst various makes, models, and years. Once in 'programming mode' one or more of the fob buttons is depressed to send the digital identity code to the car's onboard computer. The computer saves the code and the car is then taken out of programming mode.
As RKS fobs have become more prevalent in the automobile industry a secondary market of un-programmed devices has sprung up. Some web sites sell steps to program fobs for individual models of cars as well as accessory kits to remotely activate other car devices. Many sites, provide RKS fob programming instructions for free.
On early (1998-2012) keyless entry remotes, the remotes can be individually programmed by the user, by pressing a button on the remote, and starting the vehicle. However, newer (2013+) keyless entry remotes require dealership or locksmith programming via a computer with special software . The Infrared keyless entry systems offered user programming, though radio frequency keyless entry systems mostly require dealer programming.
Smart Keys supplied in Dundee
Some cars have a proximity system that is triggered if a key-like transducer is within a certain distance of the car. Sometimes called hands-free or advanced key, one of the earliest systems was found on the 1993 Chevrolet Corvette (called the Passive Keyless Entry System) and in Mercedes-Benz vehicles from 1998. Today, this system is commonly found on a variety of vehicles.
With the smart key system, a vehicle can be unlocked without the driver needing to physically push a button on the key fob to lock or unlock the car and is also able to start or stop the ignition without physically having to insert the key and turning the ignition. Instead, as approach the vehicle, the vehicle senses that the key (located in a pocket, purse, etc.) is approaching the vehicle. When the key fob is within the car's required "bubble" distance, there are two methods typically used by auto manufacturers to unlock the doors:
Method 1 — Once the key-holder is in the car's "bubble" (the required distance from the vehicle for the key to be recognised) the car will automatically unlock the driver's door. Method 2 — Once inside the car's "bubble" the car doesn't unlock the door unless the key-holder touches one of the sensors located behind the door handles. As others attempt to get in, the system senses that the driver is within the "bubble" and as they touch the sensors behind their door handles, the car will unlock their door.
In certain vehicles, there are also various functions built into the transmitter to perform various tasks. For instance, pressing the unlock button twice and keeping the button depressed on the second push allows the key-holder to roll down certain pre-programmed windows and/or the sunroof. Other functions range from turning on the headlights and various electronic equipment (factory or aftermarket). On some Toyota, Nissan and Hyundai vehicles, the system prevents the driver or passenger from accidentally locking the keys in the car, via the sensor that detects whether the key-holder is within the "bubble" area outside the vehicle.
A security key system is embedded into most modern vehicle's keys. A small chip rests on the vehicle's key or under the plastic key cover. When any key is inserted into the ignition, the ignition is coded. The key sends its security code to the ignition, which also has its own security code, and if the security codes match, the vehicle will start when the key is turned. However, if the key codes do NOT match, the vehicle will NOT start when the key is turned. Some early examples of this technology include Chrysler Corporation's Sentry Key System, or General Motors's PASSKey System. Some security keys can be programmed by the user, though most of these keys have to be programmed by a dealership or locksmith via a computer. It is not possible to copy these keys at a hardware store or auto parts store.
Security for cars in Dundee
Keyless ignition does not by default provide better security. In October 2014, it was found that some insurers in the UK would not insure certain vehicles with keyless ignition unless there were additional mechanical locks in place due to weaknesses in the keyless system.
News media have reported cases where it is suspected that criminals have managed to open cars by using signal boosters to trick vehicles into thinking that keyless entry fobs to their locks are close by even when they are far away, though have not reported capturing any such devices. The articles speculate that keeping fobs in aluminium foil or a freezer when not in use can prevent criminals from doing so.
In 2015, it was reported that Samy Kamkar had built an inexpensive electronic device about the size of a wallet that could be concealed on or near a locked vehicle to capture a single keyless entry code to be used at a later time to unlock the vehicle. The device transmits a jamming signal to block the vehicle's reception of rolling code signals from the owner's fob, while recording these signals from both of his two attempts needed to unlock the vehicle. The recorded first code is sent to the vehicle only when the owner makes the second attempt, while the recorded second code is retained for future use. Kamkar stated that this vulnerability had been widely known for years to be present in many vehicle types, but was previously undemonstrated. A demonstration was announced for DEF CON 23.
Vehicle unlocking Dundee
We can help when a vehicle anywhere in Dundee needs unlocking because a key has been locked inside the vehicle or the locks wont work and the security of the vehicle needs to be bypassed by a local auto locksmith in Dundee who understands unlocking vehicles professionally.
No matter what you need from an auto locksmith in Dundee simply call out number above and we will help you 24 hours a day 365 days a year anywhere with 20 miles of Dundee.
Auto Locksmiths Dundee, City of Dundee, DD1 4
Hilltown, Maryfield, Newport-on-Tay, Lochee, Woodhaven, Craigie, Stannergate, Linlathen, Claverhouse, Trottick, Wormit, Downfield, Ninewells, Menzieshill, Ardler, Fintry, St Marys, Baldovan, Charleston, Douglas and Angus, Brackens, South Powrie, Whitfield, West Ferry, Gourdie, Barns of Claverhouse, Strathmartine, Invergowrie, Denhead of Gray, Ballumbie, Bridgefoot, Tayport, Broughty Ferry, Burnside of Duntrune, Kirkton, Kingoodie, Drumoig, Bottomcraig, Pickletillem, Baldovie, Moatmill, Birkhill, Gauldry, Gallowhill, Muir of Pert, Balmerino, Mains of Gray, Muirhead, Shielhill, Inveraldie